The tools are used by manufacturers and equilibriums to manufacture tack and intermediary items.
Tool Cards
![]()
Anvil
Description:An anvil is a manufacturing tool, made of a hard and massive block of stone or metal used as a support for hammering ... Cost: Required on:![]()
Chisel
Description:A chisel is a tool for carving and/or cutting a hard material such as wood, stone, or metal. A chisel, typically made of hardened or ... Cost: Required on:![]()
Forge
Description:A forge (sometimes called a hearth) is a tool used for heating the metals (commonly iron or steel) to a temperature where the ... Cost: Required on:![]()
Hammer
Description:A hammer is a tool meant to deliver blows to a target, causing it to move or deform. Cost: 400 Required on:Horseshoes,
Bit,
![]()
Knife
Description:A knife is a sharp-edged hand tool used for cutting. A knife usually consists of a blade, usually less than 12 inches in length, attached ... Cost: Required on:![]()
Loom
Description:A loom is a machine or device for weaving thread or yarn into textiles. Cost: 2000 Required on:Cloth
![]()
Sewing Needle
Description:A sewing needle is a long, slender tools with a pointed tip. The first sewing needles were often made of bone or wood; modern ones ... Cost: Required on:![]()
Slack Tub
Description:A slack tub is usually a large container full of water used by a blacksmith to quench hot metal. Cost: 1000 Required on:Horseshoes,
Bit,
![]()
Tongs
Description:Tongs are gripping and lifting tools, of which there are many forms adapted to their specific use. Cost: 300 Required on:Horseshoes,
Bit,